How to use your chargers with CAN BUS

How to use your chargers with CAN BUS

1. Some customers will often ask us why their charger don't work smoothly, could not detect the voltage?
Then we will let customers check if they connect the right batteries? Some customers want to test the charger firstly, then they connect the heater/other things. Actually, now the smart charger connect the batteries with one-one charge modle. We must make sure that the charger connect the batteries, not other things.

 

 

2. Customer ordered the charger with CAN BUS, when they connect the bettries without CAN BUS, It don't work out. Actually, If the charger has CAN BUS, it receives the signal from batterries' CAN BUS, then charger work out. So if the charger charge the batteries without CAN BUS, there is no signal input, the charger will not process.

3edf02b548c866601592592f17eda83

Eventually, If your baterries has CAN BUS, you should buy the chargers with CAN BUS. If don't have, the chargers also don't need CAN BUS.  Also check the CAN BUS protocol with your charger manufacturer.


  • Previous:
  • Next:

  • Post time: Sep-30-2021

    Send your message to us:

    Write your message here and send it to us